The selection, installation, and maintenance of cantilever beam sensors significantly impact their measurement accuracy and lifespan. When selecting a sensor, the range should be chosen based on the project's maximum load, and a 30% safety margin is recommended to avoid overload damage. For dynamic load scenarios, the sensor's fatigue life must be considered. The accuracy class should be selected according to application requirements, such as OIML Class C or D. Accuracy is typically characterized by parameters such as nonlinearity and hysteresis error. For laboratory projects, a 0.05%FS high-precision sensor can be used, while 0.5%FS is sufficient for industrial applications. Environmental factors such as humidity, dust, corrosion, and temperature must be considered when selecting the protection level, such as IP65 or IP67, as well as the material, such as alloy steel or stainless steel. Special materials are required for high-temperature environments (>150 grad), u l-istainless steel b'kisja għandhom jintużaw f'ambjenti korrużivi ħafna.
Il-metodu ta 'installazzjoni jista' jintgħażel skont ir-rekwiżiti tal-proġett, bħal toqob ta 'pożizzjonament b'pass, fittings li jistgħu jinqalgħu, jew interfaces bil-kamin. L-output tas-sinjal għandu jkun kompatibbli mas-sistema ta 'akkwist; is-sinjali analogi għandhom kapaċitajiet qawwija ta' kontra l--interferenza, filwaqt li s-sinjali diġitali huma adattati għal trażmissjoni ta'-distanza twila. Għal konnessjoni ma' kompjuter jew PLC, jista' jintgħażel sensor diġitali b'konvertitur mibni-in analog-għal-diġitali. Biex tikkumpensa għat-tagħbija off-ċentru waqt l-installazzjoni, huma ppreferuti sensuri b'komponenti ta' trażmissjoni tal-forza tal-ballun tal-azzar mibnija-jew strutturi doppji tal-ballun. Dawn is-sensuri jeliminaw l-iżbalji ta' tagħbija off-ċentru permezz ta' skanalaturi tal-ballun u sistemi ta' molla, u jissimplifikaw l-installazzjoni u d-debugging.